Prepare product








Q: Do I really need AEC-Q100 for a drone application?
A: For most consumer/hobbyist drones — no. The industrial-grade STM8S207/S208 (−40°C to +85°C) is sufficient. For professional/industrial drones — yes, if: (a) operating temperature extremes exceed 85°C (engine-compartment mounting, desert operations, solar-soaked airframes), (b) mission-critical relia
Q: What is LIN and why would a drone use it?
A: LIN (Local Interconnect Network) is a low-cost (<$0.10 per node) single-wire serial bus used in automotive body electronics. In drones, LIN can connect distributed temperature sensors, LED strips, servo feedback pots, and simple actuators over a single wire — reducing the wiring harness from one UAR
The STM8AF52A8TAX is built on ST's automotive-qualified process and is tested to AEC-Q100 Grade 1 standards — meaning every die undergoes extended burn-in, temperature cycling, and electrical stress testing beyond the standard industrial qualification. This is the MCU you choose when a drone component must survive −40°C cold starts (high-altitude/mountain operations), +125°C ambient (engine-bay mounting on hybrid UAVs, solar-load in desert operations), or automotive-comparable vibration profiles (heavy-lift industrial drones, agricultural sprayer UAVs). The LQFP-80 package with 68 GPIOs and 16 ADC channels provides the highest I/O count of any STM8 device — enabling a single chip to control multiple motors, read dozens of sensors, and communicate over CAN and LIN simultaneously. The LIN 2.
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM8AF52A8TAX |
| Core | STM8 (8-bit, 24 MHz) |
| Qualification | AEC-Q100 Grade 1 (−40°C to +125°C) |
| Flash / SRAM / EEPROM | 128 KB / 6 KB / 2 KB |
| Package | LQFP-80 (14×14 mm, 0.65 mm pitch) |
| Supply Voltage | 3.0V – 5.5V |
| Temperature | −40°C to +125°C (ambient) |
| GPIO | 68 (5V-tolerant, high-sink current capable) |
| ADC | 1× 10-bit, 16 channels |
| Timers | 5× 16-bit (2× advanced PWM, 2× GP, 1× basic) |
| Communication | 2× UART, 1× SPI, 1× I²C, 1× CAN 2.0B + 1× LIN 2.1 |
| Special | AEC-Q100, LIN master/slave, −125°C max junction, 2 KB EEPROM |
| Debug | SWIM |
Aurora supports customers with STM8AF52A8TAX sourcing through verified global supply channels. We help OEMs and manufacturers manage availability challenges, production requirements, and lifecycle risks with flexible procurement solutions.
All components supplied by Aurora follow strict quality control procedures, including supplier verification, documentation review, inspection, and traceability management to ensure product authenticity and reliability.
When original STM8AF52A8TAX components face shortages, lifecycle changes, or long lead times, Aurora helps customers identify suitable alternative components based on technical requirements, application needs, and supply conditions.
Need STM8AF52A8TAX availability or sourcing support?
Contact Aurora for component verification, quotation, and reliable supply solutions.






Aurora's expansive global shipping and logistics hubs encompass nearly 200,000 ft2 of warehouse space, ensuring the secure storage and meticulous handling of your products throughout the entire process, from sourcing and inspection to testing and safe shipment.

STPMIC1APQR is a power MOSFET transistor from STMicroelectro

STM32F031K6U6 is a ARM Cortex-M0 microcontroller from STMicr

L78L05ACUTR is a linear voltage regulator from STMicroelectr

STM32F429VIT6 is a ARM Cortex-M4F high-performance microcont