Prepare product








Q: STM8S103F3P6 vs. STM8S003F3P6 — which should I use?
A: Use the S003 if you only need BLHeli_S with its default EEPROM usage (Use the S103 if you need the larger 640-byte EEPROM for custom configuration storage, per-motor calibration, AWU for sleep-mode BMS, or if the S003 is out of stock (the S103 often has better availability due to different productio
Q: Does the AWU feature help BLHeli_S ESCs?
A: Generally no. An ESC is either running (motors spinning) or idle (DShot line silent). During idle, AWU could be used to periodically check for a DShot signal, but in practice ESCs sit in WFI (Wait For Interrupt) waiting for the UART/DShot pin edge — the standard approach is already sub-mA. AWU is mo
The STM8S103F3P6 occupies the Access Line tier in ST's STM8 portfolio — one step above the Value Line S003 but below the Performance Line S207. Its key advantage over the pin-compatible S003 is the 640-byte EEPROM , which provides ample non-volatile storage for ESC configuration parameters (timing advance, demag compensation, PWM frequency, startup power), per-motor calibration data, and flight-cycle counters — all without consuming Flash pages for EEPROM emulation. The S103 also adds the Auto Wake-Up (AWU) unit , enabling the MCU to periodically wake from Active-Halt mode (consuming ~1 µA) to sample battery voltage or check for DShot signal — useful in smart-BMS applications where the MCU sleeps between measurement intervals to conserve battery power during storage. For BLHeli_S ESCs, the
| Parameter | Value |
|---|---|
| Manufacturer | STMicroelectronics |
| Part Number | STM8S103F3P6 |
| Core | STM8 (8-bit, 16 MHz, 3-stage pipeline) |
| Flash / SRAM | 8 KB / 1 KB |
| EEPROM | 640 bytes (true data EEPROM, 300K write cycles) |
| Package | TSSOP-20 (6.5×4.4 mm, 0.65 mm pitch) |
| Supply Voltage | 2.95V – 5.5V |
| Temperature | −40°C to +85°C |
| GPIO | 16 (5V-tolerant) |
| ADC | 1× 10-bit, 5 channels |
| Timers | 3× 16-bit (1 advanced PWM + dead-time, 2 general-purpose) |
| Communication | 1× UART, 1× SPI, 1× I²C |
| Special Features | AWU (Auto Wake-Up), 640-byte EEPROM |
| Debug | SWIM |
Aurora supports customers with STM8S103F3P6 sourcing through verified global supply channels. We help OEMs and manufacturers manage availability challenges, production requirements, and lifecycle risks with flexible procurement solutions.
All components supplied by Aurora follow strict quality control procedures, including supplier verification, documentation review, inspection, and traceability management to ensure product authenticity and reliability.
When original STM8S103F3P6 components face shortages, lifecycle changes, or long lead times, Aurora helps customers identify suitable alternative components based on technical requirements, application needs, and supply conditions.
Need STM8S103F3P6 availability or sourcing support?
Contact Aurora for component verification, quotation, and reliable supply solutions.






Aurora's expansive global shipping and logistics hubs encompass nearly 200,000 ft2 of warehouse space, ensuring the secure storage and meticulous handling of your products throughout the entire process, from sourcing and inspection to testing and safe shipment.

STPMIC1APQR is a power MOSFET transistor from STMicroelectro

STM32F031K6U6 is a ARM Cortex-M0 microcontroller from STMicr

L78L05ACUTR is a linear voltage regulator from STMicroelectr

STM32F429VIT6 is a ARM Cortex-M4F high-performance microcont